Industrial and Commercial Security Specialists
Telephone +44 (0)1273 917288
Find us on FacebookFollow us on TwitterLink in with LinkedInFollow us on Google PlusFollow us on Pinterest Watch us on YouTube
Security Systems
Sports Fencing
pdfmini DOWNLOAD THIS DATASHEET

AMC sports fencing has been specifically designed for use in games areas, where the requirements for impact resistance and vibration attenuation are much more stringent than for standard fencing.

Sports Fencing

Our sports fencing is manufactured from welded steel mesh with twin 8mm diameter wires sandwiching 6mm diameter verticals. The mesh is supported by I section steel posts.

An integral rubber bush at the panel mounting points allows the completed fence to reduce the structure borne sound and vibration much more than a normally bolted fence. This in turn provides a quieter environment, whilst prolonging the life span of the fencing.


Sports fencing is available in heights from 2m to 8m with a double mesh design; the lower 2m of mesh is produced with 50mm by 200mm mesh size, whilst the upper sections are formed from 100mm by 200mm mesh.

A special tennis court mesh of dimensions 34mm by 200mm is also available.

Sport Fencing


Fencing

Attractive and secure sport fencing.

Available in heights from 2m to 8m to suit most sports facilities.

Sound and vibration reduction system certified by TÜV to comply with EC Emission Protection Act..

Open steel mesh with a range of colours to reduce the visual impact upon the surroundings, and maximise visibility for players and spectators.


Galvanised and powder coated for maximum maintenance free life span.

Stadium specification fencing includes an anti climb angled section to the upper part, and utilizes a two part post system with concealed fixings to ensure spectator safety.

Modular system allows simple replacement of damaged sections.

AMC Sports Fencing



Specification:

  • Mesh Dimensions: Lower 2m: 50mm by 200mm high. Upper section: 100mm by 200mm high.
  • Horizontal wire diameter: 8mm
  • Vertical wire diameter: 6mm (with two 8mm at each end to receive fixing bolts).
  • Corner configuration: Either a corner post or when no post is used, by corner brackets.
  • Mesh configuration: Two horizontal wires sandwiching single vertical wires, resistance welded at each intersection.
  • Standard Finish: Hot dip galvanised to ISO 1461/1999 and polyester powder coated in one of the following colours: Grey, RAL 7023; Green RAL 6005; White RAL 9010; Anthracite RAL 7016.