manufacturers, distributors and installers for a wide range of access control and
security products, commercial, industrial, government and domestic applications
R-86 is a high security fencing system which has been designed to blend with and complement any environment,
making it ideal for applications requiring a sensitive yet secure approach to perimeter security.
The mesh is constructed from steel wires welded at each intersection. The vertical wires are 6mm diameter and are
sandwiched between double 8mm diameter horizontal wires. This produces an exceptionally rigid fence panel which
provides a significant delay factor to attack by vandals and would be intruders alike.
Our unique post system features completely concealed fence fixings which also makes the system ideal for use in
schools or sports arenas where any exposed edges or fixings would have safety implications.
Unlike traditional steel fencing, AMC fencing incorporates a quick fit system, allowing panel installation in up to
half the normal time. Simply install the posts as usual, lift the mesh onto the integral hooks, place the capping
strip into position bolt on the cap – On security bolt is all that is required to produce a totally secure fence.
For the ultimate security we are able to supply posts and capping strips pre drilled 300mm from the top and bottom to accept further security fixings.
High security combined with unobtrusive good looks.
High security combined with unobtrusive good looks.
Safety fencing with no sharp edges or exposed fixings, ideal for schools, hospitals, prisons, and public access areas
Open steel mesh with a range of colours to reduce the visual impact
upon the surroundings, and maximise surveillance capability.
Galvanised and powder coated for maximum maintenance free life span.
Quick fit system reduces installation costs.
Specification:
Fence heights: 1m, 1.2m, 1.8m, 2.0m, 2.2m, 2.4m.
Panel Width: 2.5m (post centre to post centre)
Mesh Construction: 50mm wide by 200mm high mesh pattern, formed by two 8mm horizontal wires either side of 6mm vertical wires, welded at each intersection.
Finish:
Hot dip galvanised and polyester powder coated.
Standard colours: Grey RAL 7023, Green RAL 6005, White RAL9010,
Anthracite RAL7016.
A range of non standard RAL colours are available at additional cost.